Upgraded Vacuum Floor Brush for Eureka & Universal Vacuum Cleaners with 1 ¼ inch (1.25”) (32mm) Inner Diameter with Horse Hair Soft Bristles 10” Wide (White – Metal)

Add to wishlistAdded to wishlistRemoved from wishlist 0

$12.95


Price: $12.95
(as of Dec 24, 2024 06:45:13 UTC – Details)


Selgo Replacement Hardwood Floor Brush With Metal Curved Swivel Elbow With Soft Horsehair Bristles, For Eureka And Universal Vacuum Cleaners With 1 and 1/4 Inch Wand Size Opening (1.25 Inch) (32mm) 10 Inch Wide Cleaning Path.
Inner diameter is a standard 1.25″(32mm) size for most vacuum brands,please check the right size (Inner Diameter)
Most Vacuum Cleaners Are That Size Please Check Before Buying
1 1/4 Inch wand size opening. 10 Inch wide cleaning path.
Special Soft Bristles To Keep Your Floors Beautiful. Soft bristles made from horse hair.
Might NOT Fit Miele, Dyson, Shark, Dirt Devil Canister, Prolux Titan. Bissell. please check your size

Customers say

Customers find that the vacuum attachment fits well with their vacuums and works well on hardwood floors and vinyl floors. They appreciate its good build quality, sturdy construction, and value for money. The design and ease of use are also praised by customers.

AI-generated from the text of customer reviews

12 reviews for Upgraded Vacuum Floor Brush for Eureka & Universal Vacuum Cleaners with 1 ¼ inch (1.25”) (32mm) Inner Diameter with Horse Hair Soft Bristles 10” Wide (White – Metal)

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Tim S

    Budget friendly, Quality hard floor attachment for a Mighty Mite
    I bought this as a replacement for a Mighty Mite canister vac. The original attachment could have worked better on low-pile carpets and hard floors. This replacement works well on lvp flooring, hardwood floors, and low pile area rugs. The horse hair bristles make vacuuming smooth and prevent scratching my hardwoods. I like the white color because it does not leave marks on my white baseboards. This attachment does a good job of getting debris from the edges of the wall, whereas, with my old attachment, I had to use the hose for these areas. I was going to buy a new vacuum before I thought about just replacing the floor brush. I would recommend this attachment as an upgrade for your Mighty Mite.

    Helpful(0) Unhelpful(0)You have already voted this
  2. Savannahnan

    Great floor brush for my Eureka Windtunnel vacuum!
    I was originally concerned that this brush was 10″ wide, as opposed to my previous brush that was 12″ wide. However, it turned out that this new floor brush has significantly more suction power and is much easier to maneuver into corners, under the bed, under sofas, etc. than my old floor brush. It is sturdy and well constructed. The bristles on the bottom do a great job of brushing up rugs as I vacuum. They are work well when vacuuming the wood floors. We are extremely happy with this brush!

    Helpful(0) Unhelpful(0)You have already voted this
  3. beachy

    It fits the Eureka Mighty Mite great !
    I bought the metal one and the fit is perfect so glad I chose the metal not the plastic. It’s made very well.Quality

    Helpful(0) Unhelpful(0)You have already voted this
  4. Alex Founders

    Works just like my 30 year old one that I lost
    Had an old Beam one that came with the central vac. It worked great, but I lost it when we stopped giving a crap about the floor after 10 years of kids and dogs destroying it. I had the floors redone, and I need something gentle for the next 30 days while the floor fully cures. So, after wasting 2 hours looking for it, I just ordered this one. Pretty sure it’s exactly the same as the one I had, only in black. The horse hair is nice and gentle on the floor, and the front bristles are a little shorter so there’s a gap for dirt to go under so you’re not just pushing dirt all over the floor. It works WAY better than a dyson stick vac.The suction is great. I wish it was wider, but that would negatively affect suction. If I can find a wider one that’s as nice as this one then I will probably try it. Although this one is pretty fast, I did about 1700 sq ft in around 20 mins with it.Also, if you are using a central vac, one of the best things you can get is a hose sock. It’s a cloth sock that goes over the whole hose so you’re not scratching up walls and floors when you drag the hose around. I HIGHLY recommend getting one of these. Get one that comes with a cardboard tube to stretch it over for installation, it makes it very easy.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Charles E. Stillman

    decent vaccum attachment
    I use this with a small shop vac for spot clean up on hardwood and berber floors. It works well.

    Helpful(0) Unhelpful(0)You have already voted this
  6. David Sikking

    The best for the best price.
    I threw away the cheap, junk plastic crap that came with my new Kenmore canister vacuum-cleaner that I love (I bought that from Amazon also). I’m ‘old-school’ so for me value = price + materials / time. I’d rather buy an item once, instead of having it break repeatedly necessitating its continuous replacement which leads to a higher cost over time. This brush fit my needs completely, was well engineered and preforms completely.I would buy this again, but I never will need to do so.

    Helpful(0) Unhelpful(0)You have already voted this
  7. Denvermike

    Outstanding Quality
    Perfect replacement for our floor vacuum brush

    Helpful(0) Unhelpful(0)You have already voted this
  8. Customer 10

    works as advertised
    Works very well for vinyl plank floors which is why I purchased it after just having vinyl plank flooring installed in every room in my house other than the bathroom.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Jorge Ortiz

    Para pisos es excelente y no hace ruido para nada. Muy facil de utilizar en todo tipo de pisos. No es recomendable para alfombras.

    Helpful(0) Unhelpful(0)You have already voted this
  10. Peter

    The brush is good. If the metal section is wrong (inside vs outside connection), you can heat the rubber with a hair dryer, and gently lever it out. You can do the same with your old brush, and swap the metal parts.Experiment on your old brush first. The entire process of swapping metal ends (if required) will only take a few minutes.

    Helpful(0) Unhelpful(0)You have already voted this
  11. Gilbert74

    La ranger de poils est moins fournie et l’angle du manche pas assez prononcé. Ce qui fait en sorte que le balais est toujours trop penché par en avant et ne ramasse pas bien les graines ou poussière.

    Helpful(0) Unhelpful(0)You have already voted this
  12. raylw2

    Definitely poor quality in absolute terms and especially compared to Electrolux products from the 1980s. Cheap plastic, thin metal, does not fit well and does not suck well (it sucks in a different way). I wish I could return it but return period has expired.

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Beauty Mery
    Logo
    Shopping cart